SPEAKER LEDS
BLUAVE SG-LED Speaker LED Kit
BLUAVE SG-LED Kit
The SG-LED multi color speaker kit is designed to integrate with our Bluave marine speaker grills the 7.0, 9.0 & MG10 Unlike other brands you can simply ADD a SG-LED to any of your Bluave speakers to enhance the image of your boat and marine audio sound system. The SG-LED discs can be wire to any 12volt rgb controller or simply wired as a single red, green or blue color.
For single color operation =
For your color of choice wire the red, green or blue to a negative -12volt ground
& positive +12volt to the black wire
For multi color operation =
Black = ground
Red to red
Green to green
Blue to blue
Also see the manual provided with your rgb light controller of choice
BLUAVE ACCESSORIES
BLUAVE MG-10 INSERT
BLUAVE MG-10 INSERT
BLUAVE MG-10 INSERT
MG-10 INSERT
Made of .25" white PVC and designed to be wrapped with grill cloth (not included). Provides a finished look to the cut edge behind the MG10 Grill when installed as a sub vent.
BLUAVE T-SWIVEL
BLUAVE MG-10 INSERT
BLUAVE MG-10 INSERT
T-SWIVEL
Anodized aluminum bracket that utilizes existing T-71 and T-91 brackets to allow for 360 degree rotation providing the ability to project sound in multiple directions.
7.7 TO 7.0 RETROFIT KIT
BLUAVE EM2.0 SURFACE MOUNT
BLUAVE EM2.0 SURFACE MOUNT
WW 7.7-7.0RETRO
Set includes PVC backing plate and Acrylic trim ring to adapt the larger 7.7 hole and screw placement to the cutout of the M7.0CX
BLUAVE EM2.0 SURFACE MOUNT
BLUAVE EM2.0 SURFACE MOUNT
BLUAVE EM2.0 SURFACE MOUNT
SURFACEMOUNT-B (Black)
SURFACEMOUNT-W (White)
.5" HDPE beveled rings with screw holes to aid in mounting of EM2.0 tweeter when installer cannot get to backside of mounting surface. Available in black or white.