WWS Enclosures & Pods

MSE Sub Enclosure

QUAD Speaker Pod

REV-R 5.25" Speaker Pods

UTVA-R Quad Speaker Pod




  • Marine 10″ Subwoofer Enclosure Box 
  • Made from Durable LLPDE Plastic
  • UV Resistant Finish
  • Black Color
  • Outside Diameter 10 1/2" H x 17 1/2" W x 10 1/2" D
  • Fits over 90% of all boats
  • Ideal to use in conjunction with MSG-W or MSG-S subwoofer vent 
  • Mounting Hardware NOT Included
  • Subwoofer Mounting Depth 6 5/8"
  • Subwoofer Max Outer Diameter 10 5/8"
  • Subwoofer Mounting Diameter 9 1/4"
  • Includes subwoofer gasket
  • Lightweight Un-Loaded Marine Enclosure -Tuned @38hz

Made of durable lightweight UV resistant LLPDE (polyeurathane) material, the MSE is a vented enclosure designed for a 10" subwoofer. It's small, extremely tough stature allows it to be installed in nearly every boat make & model. By using the MSE and MSV together you will increase ventilation and improve sound output of the MSE. These features make the MSE achieve much greater output and sound quality than the traditional marine free air application. 

(back to top)



QAP-W (White)

QAP - B (Black)

  • Marine Audio Boat Tower Quad 4 Way 6 1/2″ Speakers Pod 
  • Made from Durable LLPDE
  • UV Resistant Finish
  • Available in White (QAP-W) or Black (QAP-B) 
  • Sold as one pod
  • Outside Diameter 16 3/4" W x 8 1/2" D x 8" H
  • Inside Speaker Diameter 5 5/16"
  • Houses 6 1/2" to 7" Speakers
  • Grills Not Included


  1. Quick Connect Harness
  2. EVA Foam Gasket with QAP-W
  3. 4 Mounting  Screws
  4. Installation Manual
  5. Fill Material to Enhance Performance

The Waves and Wheels QAP (Quad Speaker Arch Pod) is designed for marine radar arches and many other applications for optical musical dispersion reaching beyond 50 yards of the bow and transom of the vessel/offroad vehicle!

The QAP is UV resistant and made from LLDPE (Polyeurathane). The unique 4-way design not only gives an even musical dispersion throughout and beyond the boat/vehicle, it also gives a sleek cosmetic enhancement to the arch or rollbar. The QAP is incredibly user friendly. It comes with an EVA gasket to seal the enclosure to the arch (no silicone needed). 

(back to top)

REV-R2 5.25" Speaker Pods



  • Custom Powersport 5 1/4″ Gloss Black Speaker Pods Pair
  • Made from Durable Plastic
  • UV Resistant
  • Black Gloss Finish
  • Sold as a left & right pair
  • Dimensions 5 3/4" H x 7 1/2" W x 6" D
  • Fits almost all Power Sport vehicles
  • wiring harness designed for 5.25" coaxials
  • Fits 5 1/4" speakers with mounting tabs
  • Mounting Diameter 4 3/4"

The REV-R recreational vehicle kit is designed to provide a high-end audio system literally anywhere - PWC's, motorcycles, snowmobiles, golf carts, atv's, and anything you can put your imagination to. These sleek designed pods house 5 1/4" coaxials that can be mounted almost anywhere on your vessel or vehicle. 

(back to top)

UTVA-R 5.25" Quad Speaker Pod


  • Custom Quad (4) 5 1/4″ Speakers Power Sports UTV Pod 
  • Made from Durable Plastic
  • UV Resistant
  • Black Finish
  • Sold as a (4 way) single pod
  • Hole with rubber grommet for speaker wire
  • Includes hardware needed to install with detailed instructions
  • Fits 5 1/4" Speakers
  • Mounting Diameter 4 1/2"
  • Dimensions 46 1/4" W x 7 1/2" D x 4 3/4" H
  • Adjustable Bracket slides from 49" to 58 1/2"

Side by Side, Utility Vehicle Unloaded Speaker Pod. Made of very durable polyeurathane, the UTVA-R houses four 5.25" speakers and comes with fully adjustable mounting brackets allowing the ability to fit over 13 of the UTV's currently on the market. Including the Yamaha Rhino, Polaris Ranger, Kawasaki Tyrx, Articat Prowler, Honda Big Red, John Deere, Custom Sand Rails, 

and many more applications! 

(back to top)